how to installing omnimount fm82 om 1100664,How to Installing Omnimount FM82 OM 1100664

How to Installing Omnimount FM82 OM 1100664

Installing the Omnimount FM82 OM 1100664 is a straightforward process that can enhance the audio experience in your car. Whether you’re a DIY enthusiast or a first-time installer, this guide will walk you through the steps to ensure a successful installation.

Before You Begin

Before diving into the installation process, it’s essential to gather all the necessary tools and materials. Here’s a list of items you’ll need:

• Omnimount FM82 OM 1100664
• Screwdriver set
• Wire stripper/cutter
• Insulation tape
• Wire connectors
• Car battery disconnect tool

Ensure that your car’s engine is turned off and the keys are removed from the ignition before beginning the installation.

Step 1: Remove the Car’s Dashboard

Start by locating the dashboard trim pieces that need to be removed to access the mounting location for the FM82. This may vary depending on your car’s make and model. Here’s a general guide:

1. Locate the trim pieces around the dashboard, typically held in place by clips or screws.
2. Use a screwdriver to remove any screws securing the trim pieces.
3. Gently pull the trim pieces away from the dashboard, being careful not to damage them.

Once the trim pieces are removed, you should have access to the mounting location for the FM82.

Step 2: Mount the FM82

Now it’s time to mount the FM82. Follow these steps:

1. Position the FM82 in the mounting location, ensuring that it fits securely.
2. Attach the FM82 to the mounting location using the provided screws. Tighten the screws securely but be careful not to overtighten them.
3. Double-check that the FM82 is securely mounted and that there are no gaps between it and the dashboard.

Step 3: Connect the FM82 to the Car’s Audio System

Next, you’ll need to connect the FM82 to your car’s audio system. Here’s how to do it:

1. Locate the antenna wire from the FM82 and the antenna wire from your car’s audio system.
2. Strip the insulation from the ends of both wires, exposing about 1/2 inch of the wire.
3. Connect the two wires together using a wire connector. Wrap the connection with insulation tape to ensure a secure connection.
4. Repeat this process for the ground wire, connecting it to the car’s ground wire.

Once all the connections are made, double-check them to ensure they are secure and properly insulated.

Step 4: Reassemble the Dashboard

Now that the FM82 is connected, it’s time to reassemble the dashboard:

1. Replace the dashboard trim pieces you removed earlier, ensuring they are securely in place.
2. Reconnect the car’s battery using the battery disconnect tool.
3. Turn on the car’s audio system and tune to an FM station. Adjust the FM82’s position until you achieve the best reception.

That’s it! You’ve successfully installed the Omnimount FM82 OM 1100664 in your car. Enjoy your improved audio experience.

Additional Tips

Here are a few additional tips to ensure a smooth installation:

• Take your time and be patient during the installation process.
• Keep the installation area clean and organized to avoid any mistakes.
• Consult your car’s owner’s manual for specific instructions on removing dashboard trim pieces.
• If you’re not confident in your ability to perform the installation, consider seeking the help of a professional installer.

By following these steps and tips, you should have no trouble installing the Omnimount FM82 OM 1100664 in your car. Happy listening!